Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Unable to Select Fluid-Fluid Interface for Free Surface Deformation using Moving Mesh
Posted 28 ott 2024, 19:35 GMT-4 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I am trying to simulate the physics model mentioned in the paper whose DOI link is here: https://doi.org/10.1016/j.applthermaleng.2024.122562. Specifically the one in section 2.2 the MHD submodel with the moving mesh for the geometry that I have in my mph file.
I am unable to select the Fluid-Fluid Interface between the air and liquid metal domain. I crosschecked to see if my other boundary conditions match with the one given in Table 1 in the paper and they do. Please let me know if I am missing anything there.
Additionally, utang is the tangential velocity that seems to only appear when I choose RANS model. Is there a possibility of getting it by choosing Laminar Flow and simulating free surface deformation using only the Laminar Flow without additional turbulence modelling.
Any help is much appreciated! Thanks! Maruthi
Attachments:
Hello Maruthi Annamaraju
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.