Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to assign a pulsed input to the electrodes?

Muthuraman Chinnadurai

Please login with a confirmed email address before reporting spam

Hello Everyone,
My query is how to apply a rectangular electrical pulse of 1200v magnitude, with duration of 10^(-9)s .
Also to apply 20 pulses of the above mentioned pulse.
Looking forward eagerly for reply.
Thanks in advance.

1 Reply Last Post 4 ott 2012, 07:55 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 ott 2012, 07:55 GMT-4
Hi

Make a Search on the Forum you will find many references ;)

--
Good luck
Ivar
Hi Make a Search on the Forum you will find many references ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.