Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Trying to model Fluid-on-Fluid interaction

Please login with a confirmed email address before reporting spam

Hi,

I'm trying to model the impingement of a high velocity fluid/gas onto a liquid surface (a molten pool of metal to be precise). Right now I'm working with the 'Laminar Two Phase Flow,tpf' module for this. I'm yet to understand many of the underlying physics, but I'm confused if this is the right type of physics node that should be chosen for this problem or is there a better way to model fluid-on-fluid interaction?

It's a simple 2-D problem where I want to see the deformation of the molten pool of metal due to the gas impingement from the top. Please suggest what I should do.

Thanks in advance.

2 Replies Last Post 30 giu 2012, 14:34 GMT-4

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 giu 2012, 10:45 GMT-4
Take a look at www.comsol.dk/showroom/gallery/1445/ and www.comsol.dk/showroom/gallery/177/
Take a look at http://www.comsol.dk/showroom/gallery/1445/ and http://www.comsol.dk/showroom/gallery/177/

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 giu 2012, 14:34 GMT-4
Thanks for the links. I had taken a look at those tutorials already, but still COMSOL is generating error messages in the time dependent solver. It says "Failed to find consistent initial values", but I've properly defined the initial values for both fluid domain. Here's the .mph file, hope someone can take a look and suggest something.
Thanks for the links. I had taken a look at those tutorials already, but still COMSOL is generating error messages in the time dependent solver. It says "Failed to find consistent initial values", but I've properly defined the initial values for both fluid domain. Here's the .mph file, hope someone can take a look and suggest something.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.