Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Multi-material topology optimization

Please login with a confirmed email address before reporting spam

Dear All, Hello! I am simulating multi-material topology optimization, which limits the geometry structure but changes the stiffness by multiple materials distribution in geometry.

I already found the toplogy optimization case files in the applications library, all of them are about structural topology optimization on one material.

There is an article about multi-material topology https://www.comsol.com/paper/multiphysics-multi-material-topology-optimization-of-a-thermal-actuator-with-com-81651

But I did not know how to reproduce this simulation. May I ask for a case file or more technological tutorial details? How to assign diffrent materials in one domain, and how to set the multi-material interpolation type?

Thanks in advance!



1 Reply Last Post 19 ago 2021, 04:19 GMT-4
COMSOL Moderator

Hello Zhanwei Wang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 19 ago 2021, 04:19 GMT-4

You can look at the room acoustics application library file. In acoustic topopt you have two different materials; air and 'solid' (which is still a fluid, though). You can see more about this multi material phase topopt on my blog post (https://www.comsol.dk/blogs/how-to-use-acoustic-topology-optimization-in-your-simulation-studies/) or look up the topic in Topology Optimization by Bendsø and Sigmund.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
You can look at the room acoustics application library file. In acoustic topopt you have two different materials; air and 'solid' (which is still a fluid, though). You can see more about this multi material phase topopt on my blog post (https://www.comsol.dk/blogs/how-to-use-acoustic-topology-optimization-in-your-simulation-studies/) or look up the topic in Topology Optimization by Bendsø and Sigmund.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.