Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

I want to simulate induced force by helmholtz coil

Posted 1 feb 2012, 23:49 GMT-5 Low-Frequency Electromagnetics Version 4.2 2 Replies

Jaemyung Lim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate how much force is induced to the permanent magnet when I use helmholtz coil and put a permanent magnet in the middle of coil.
However, it cannot be simulated.

I guess the setting about permanent magnet is incorrect.
What I want simulate is just a commercial disk shape magnet.
Like this,

www.kjmagnetics.com/proddetail.asp?prod=D101-N52


I attached my simulation file.
Coul any body help me?

Thank you

Attachments:

2 Replies Last Post 2 feb 2012, 18:09 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 feb 2012, 02:56 GMT-5
Hi

Why use 2 physics, oyu can keep MF and remove the MFNC, then add a new "ampere law" node in MF for the magnet, define Constitutive Relation to MAgentisation and set 1E6 A/m (or whatever fits your magnet) for the My value. Then add a domain Force calculation on the magnet

This should help ;)

--
Good luck
Ivar
Hi Why use 2 physics, oyu can keep MF and remove the MFNC, then add a new "ampere law" node in MF for the magnet, define Constitutive Relation to MAgentisation and set 1E6 A/m (or whatever fits your magnet) for the My value. Then add a domain Force calculation on the magnet This should help ;) -- Good luck Ivar
Jaemyung Lim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 feb 2012, 18:09 GMT-5
At first, I appreciate your help.
There was a progress in simulation.
However, I have another question.
In the simulation, even though I changed current density, the force is not changed.
Could you check my model and tell me which one is incorrect?

Thank you so much.
At first, I appreciate your help. There was a progress in simulation. However, I have another question. In the simulation, even though I changed current density, the force is not changed. Could you check my model and tell me which one is incorrect? Thank you so much.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content