Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Spherical Shell in COMSOL

Please login with a confirmed email address before reporting spam

How can I create a spherical shell in COMSOL? Or for that matter any figure that is not one of the basic shapes COMSOL offers.

Is there any way I can "substract" one sphere from a bigger one? (An idea to construct a shell, but don't know how to do it in COMSOL)

3 Replies Last Post 20 dic 2011, 14:27 GMT-5
Nagi Elabbasi Facebook Reality Labs

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19 dic 2011, 21:48 GMT-5
Subtract the inner sphere from the outer one. Check out Geometrry -> Boolean Operations -> Difference
Subtract the inner sphere from the outer one. Check out Geometrry -> Boolean Operations -> Difference

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 dic 2011, 03:30 GMT-5
Hi

you have also the "layer" sub tab in the most geometrical object node

--
Good luck
Ivar
Hi you have also the "layer" sub tab in the most geometrical object node -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 dic 2011, 14:27 GMT-5
Thanks! It works :)
Thanks! It works :)

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.