Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
solving PDE's for bi-layer structure
Posted 30 set 2011, 15:27 GMT-4 Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
I have a model consisting of two bonded different layers. Physics in each layer is governed by a general PDE (different coefficients) form. I do not know how i can couple the PDE's, so that a flux at the interface remains continuous.
the condition i would like to apply at the interface has the form of A1 +B1*div(c1) = A2 + B2*div(c2), here A's and B's are constants, where c1 and c2 are evaluated at the common interface. I am sure my model does not work properly since i have tested it for bi-layered model with identical material properties, the results do not match the one layer model.
(Refer to the model attached) Any help is appreciated.
Thank You
Kumud
Attachments:
Hello Kumud Kanneganti
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.