Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Inductive coupling, Mesh and convergence problems
Posted 13 giu 2011, 18:37 GMT-4 RF & Microwave Engineering Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to simulate the amount of induced current, in some spring shaped structure which has mutual inductance with another inductor. I want to see how much power I can transfer from the external inductor (second inductor)to the coupled inductor(stent).
to simulate that, I defined two separate springs made of Copper floated in Air.
I used edge current in Magnetic and Electric field module for applying some excitation in the external coil and anticipating to see some induced current in the other spring (the distance between these two is about 5 mm).
unfortunately the Magnetic and Electric field module can NOT solve the problem.
Non of the solvers can't converge and find the magnetic field and induced current.
I let the simulator works for 4 hours to find the solution but no success.
Anyone knows what's the problem?
Regards,
Kamyar
Hello Kamyar keikhosravy
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.