
Browse by Category
 All solutions
 ALE / Parameterized Geometry (1)
 Electromagnetics (1)
 Error Messages (81)
 Fluid Dynamics (2)
 General (11)
 Geometry (15)
 Import (16)
 Installation (61)
 Mesh (11)
 Multiphysics (1)
 Physics (11)
 Postprocessing (1)
 Solver (21)
 Structural Mechanics (3)
 User Models (1)
Solution Number:  1038 
Title:  Using symmetries in COMSOL Multiphysics 
Platform:  All Platforms 
Applies to:  All Products 
Versions:  All versions 
Categories:  Physics, Geometry 
Keywords:  symmetry plane axis rotation reflection translation rotoflection rototranslation 
Problem Description
How do I take advantage of the symmetries in my COMSOL model?
Solution
Using Symmetries to Reduce Model Size
By using symmetries in a model you can reduce its size by onehalf or more, making this an efficient tool for solving large problems. This applies to the cases where the geometries and modeling assumptions include symmetries. The most important types of symmetries are axial symmetry and symmetry and antisymmetry planes or lines.
 Axial Symmetry is common for cylindrical and similar 3D geometries. If the geometry is axisymmetric, there are variations in the radial (r) and vertical (z) direction only and not in the angular () direction. You can then solve a 2D problem in the rzplane instead of the full 3D model, which can save considerable memory and computation time. Many COMSOL Multiphysics physics interfaces are available in axisymmetric versions and take the axial symmetry into account.
 Symmetry and Antisymmetry Planes or Lines are common in both 2D and 3D models. Symmetry means that a model is identical on either side of a dividing line or plane. For a scalar field, the normal flux is zero across the symmetry line. In structural mechanics, the symmetry conditions are different. Antisymmetry means that the loading of a model is oppositely balanced on either side of a dividing line or plane. For a scalar field, the dependent variable is 0 along the antisymmetry plane or line. Structural mechanics applications have other antisymmetry conditions. Many physics interfaces have symmetry conditions directly available as features.
To take advantage of symmetry planes and symmetry lines, all of the geometry, material properties, and boundary conditions must be symmetric, and any loads or sources must be symmetric or antisymmetric. You can then build a model of the symmetric portion, which can be half, a quarter, or an eighth of the full geometry, and apply the appropriate symmetry (or antisymmetry) boundary conditions.
Thermal Contact Resistance Between an Electronic Package and a Heat Sink example with symmetry planes indicated as grey workplanes. Only one sixteenth of the model geometry is used for computing the solution.
Examples
For an example of using a symmetry plane in Fluid Dynamics and Heat Transfer, see the model Free Convection.
The above shown model Thermal Contact Resistance Between an Electronic Package and a Heat Sink is available among the Heat Transfer Module examples.
For an example of highfrequency electromagnetic applications with symmetry planes, see the model Microwave Oven from the RF Module.
The model Muffler with Perforates, available in the Acoustics Module, simulates a car muffler with perforated baffles and pipes for a range of frequencies.
Possible Pitfalls
In structural mechanics there are some cases when the results are not purely symmetric even though the problem at first may look so.
 Eigenfrequencies in symmetric structures can be both symmetric and antisymmetric. You need to do two studies of half the geometry, one with each set of boundary conditions, in order to capture all the eigenfrequencies. If there are multiple symmetries (like modeling a quarter of a structure) all permutations of boundary conditions must be considered.
 In linearized buckling analysis, the lowest buckling mode of a symmetric structure can in the same way be either symmetric or antisymmetric.
 Axial symmetry can only be used to find axially symmetric eigenmodes in the case of eigenvalue analysis (eigenfrequency or buckling).
 Antisymmetric boundary conditions are generally not compatible with geometrically nonlinear analysis of solids since the constraint will remove some strain terms necessary to describe a finite rotation at the
antisymmetry section.
Find More Information
For more tips on efficient modeling practices, see COMSOL Multiphysics Reference Manual, in the section Modeling Guidelines.
Disclaimer
COMSOL makes every reasonable effort to verify the information you view on this page. Resources and documents are provided for your information only, and COMSOL makes no explicit or implied claims to their validity. COMSOL does not assume any legal liability for the accuracy of the data disclosed. Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark details.