In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
COMSOL-News-Magazine-2017
COMSOL-News-Magazine-2017-Special-edition-acoustics
COMSOL-News-Magazine-2016

FEM Correlation and Shock Analysis of a VNC MEMS Mirror Segment - new

E. Aguayo[1], R. Lyon[2], M. Helmbrecht[3], S. Khomusi[1]
[1]The Newton Corporation, Bowie, MD, USA
[2]NASA Goddard Space Flight Center, Greenbelt, MD, USA
[3]Iris AO, Inc., Berkeley, CA, USA

Microelectromechanical systems (MEMS) are becoming more prevalent in today’s space technologies. The Visible Nulling Coronagraph (VNC) instrument, being developed at the NASA Goddard Space Flight Center, uses a MEMS Mirror to correct wavefront errors. This MEMS, the Multiple Mirror Array (MMA), will enable the VNC instrument to detect Jupiter and ultimately Earth size exoplanets. The MMA ...

Glass Windscreen Forming Optimization by Finite Element Analysis Using COMSOL Multiphysics

R. Carbone[1]
[1]Material and Production Engineering Department, University of Naples “Federico II”, Naples, Italy

Glass products are widely diffuse in the everyday reality. An interesting glass application field, from a technological point of view, is the transportation area. The automotive industry always needs for more complex shape of windscreen in order to satisfy the request of new design. In the paper, a “common” windscreen forming process, for automotive application, is described. The results of a ...

Time-Dependent Thermal Stress and Distortion Analysis During Additive Layer Manufacturing, by Powder Consolidation by Laser Heating

M.S. Yeoman[1], J. Sidhu[2]
[1]1. Continuum Blue Ltd., Tredomen Innovation & Technology Park, Tredomen, Ystrad Mynach, United Kingdom
[2]BAE Systems, Advanced Technology Centre, Bristol, United Kingdom

A time-dependent COMSOL Multiphysics model of an additive manufacture process, which uses powder consolidation by laser heating was developed, providing a platform to better understanding the manufacture process & provide a tool to reduce resulting distortion & optimization of an additive manufacture process. The model simulates a high intense laser energy source moving along a pre-defined time ...

Determination of the Fundamental Resonant Modes of a Polysilicon H-Beam Using COMSOL Multiphysics® Software

T. Thomas[1], M. Sundaram[1], R. Bejam[1]
[1]Birla Institute of Technology and Science, Pilani - Pilani Campus, Rajasthan, India

A Polysilicon H-beam is a micro-machined structure consisting of two primary members connected by a third member of much lower width and much greater aspect ratio. This structure exhibits interesting vibration behavior at specific frequencies which are known as resonant modes. A ‘mode’ may be described as a specific physical shape that the vibrating object assumes at peak oscillation amplitude ...

Introduction to COMSOL based Modeling of Levitated Flywheel Rotor

A. Pilat
AGH University of Science and Technology
Kraków, Poland

This elaboration presents a pre-study on automatic rotor construction for the flywheel energy storage system dedicated to operate in the levitation mode. The optimization profile model is used as a basic profile source. The 3D flywheel shape is generated on the base of obtained profiles. Eigenfrequencies are calculated to validate the operation on rigid mode. A steel and aluminum based ...

The Refinement of the Contact Compression Ring Chamfer for Race Engine Conditions

M. Dickinson[1], N. Renevier[2], W. Ahmed[3]
[1]Racing to Research team, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, United Kingdom
[2]The Jost Institute, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, United Kingdom
[3]Institute of Nanotechnology and Bioengineering, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, United Kingdom

Use of COMSOL Multiphysics: In operation, the piston ring is surrounded by gas acting on it, using effect of chamfer design has been considered using Love’s equation in conjunction with Stone’s equation for force ad Miler’s equation for gas pressure modelling. The chamfer geometry was controlled through variable inputs such as coating thickness, ring thickness, distance from the ring angle ring ...

µHeater on a Buckled Cantilever Plate for Gas Sensor Applications

A. Arpys Arevalo Carreno[1], E. Byas[1], I.G. Foulds[1]
[1]King Abdullah University of Science and Technology, Thuwal, Mecca, Kingdom of Saudi Arabia

In semiconductor gas sensors, the base of the gas detection is the interaction of the gaseous species at the surface of the semiconducting sensitive material. Since the chemical reactions at the surface of the sensor material are functions of temperature. We simulate our µHeater design on a Buckled Cantilever Plate (BCP). Such structure allows the sensor to be suspended for thermal insulation. ...

Numerically Closing the Loop of the Adaptive Optics Sensor: the Validation of the COMSOL Multiphysics® Simulation - new

C. Del Vecchio[1], R. Briguglio[1], A. Riccardi[1]
[1]National Institute for Astrophysics, Arcetri Astrophysical Observatory, Florence, Italy

As any other modelling of a physical behavior, the numerical simulation of the mechanical response of an adaptive secondary mirror requires that the results match the experimental data. Such an agreement was recently demonstrated for the local mirror stiffness of the LBT and VLT Deformable Mirrors; a reliable modeling is a good tool for the extrapolation of the missing optical data (spider ...

Designing Materials for Mechanical Invisibility Cloaks

P. Olsson[1], F. Larsson[1], A. Khlopotin[1], S. Razanica[1]
[1]Chalmers University of Technology, Gothenburg, Sweden

In solid mechanics, there is considerable interest in achieving “invisibility”. The applications in mechanics include protection of structures and parts of structures from potentially harmful transient waves and steady state vibrations. A suggested large scale application is that protection against seismic waves from earthquakes could be achieved by using cloaking to re-route the waves around ...

Optimization of Mechanical Properties of Superconducting Cavities for Project X LINAC

I. Gonin[1], M. Awida[1], T. Khabiboulline[1], V. Yakovlev[1]
[1]Fermilab, Batavia, IL, USA

Project X is a proposed proton accelerator complex at Fermilab. The CW LINAC is based on five types of resonators operating at three frequencies: half-wave, spoke, and elliptical. The low beam current for the CW operation of Project X requires cavities to operate at a high loaded Q and, thus, narrow bandwidth. Therefore, it requires optimal mechanical design of the cavities to minimize the ...