Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper e Appunti applicativi

Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo

In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.

Visualizza gli articoli presentati alla COMSOL Conference 2020

All

Bengaluru 2023

Munich 2023

Computational Fluid Dynamicsx

Modeling Magnetic Configurations for Improved Separations of Magnetic and Non-Magnetic Materials

S. Khushrushahi[1], T.A. Hatton[1], M. Zahn[1]
[1]Massachusetts Institute of Technology, Cambridge, MA, USA

Magnetic separation of magnetic liquid phases/particles from non-magnetic liquid phases/particles are needed for applications such as cleaning up oil spills by separating oil and water liquid phases or separating magnetic materials from non-magnetic materials in biomedical and ... Per saperne di più

Thermo-Fluid Dynamics of Flue Gas in Heat Accumulation Stoves: Study Cases

D. Rossi[1], P. Scotton[1]
[1]University of Padova, Department of Geosciences, Padova, Italy

The research aims to clarify some aspects of the thermo-fluid dynamics of woody biomass flue gas, within the twisted conduit inside the heat accumulation stoves, and exposes also some analysis about the heat transport and heat exchange processes. The high temperature flue gas flows in ... Per saperne di più

Using CFD to Predict the Performance of Innovative Wind Power Generators

D. Allaei[1]
[1]Sheer Wind Inc., Chaska, MN, USA

INVELOX is an innovative wind power generation system as shown in Figure 1. It is comprised of a wind capturing system that accelerates and delivers high kinetic energy wind to a power conversion system placed in the Venturi section of the INVELOX. The objective of this project is to ... Per saperne di più

Pressure Drop CFD Modeling in Spacer-Filled Channels for TFF Ultrafiltration

Y. Zou[1]
[1]EMD Millipore Corporation, Bedford, MA USA

Membrane-based tangential flow filtration (TFF) cassettes are used for the clarification, concentration and purification of fluid streams containing macromolecules of proteins. In TFF, the protein fluid is pumped tangentially along the surface of the membrane. The feed flow along the ... Per saperne di più

COMSOL Simulations for Steady State Thermal Hydraulics Analyses of ORNL’s High Flux Isotope Reactor

P.K. Jain[1], V.B. Khane[2], J.D. Freels[1]
[1]Oak Ridge National Laboratory, Oak Ridge, TN, USA
[2]Missouri University of Science and Technology, Rolla, MO, USA

Simulation models for steady state thermal hydraulics analyses of ORNL’s HFIR have been developed using COMSOL. A single fuel plate and coolant channel of each type of HFIR fuel element was modeled in three dimensions. The standard k-? turbulence model was used in simulating turbulent ... Per saperne di più

Irrotational Motion of an Incompressible Fluid Past a Wing Section in an Unbounded Region

J. Russell[1]
[1]Florida Institute of Technology, Melbourne, FL, USA

Developers of numerical models who address the title problem face several hurdles, such as: (1), the need to formulate boundary conditions applicable in an unbounded region; (2), The need to specify conditions suitable to ensure a unique solution in a doubly connected region; and (3), ... Per saperne di più

Dynamic Multi-Phase Modelling and Optimisation of Fluid Jet Polishing Process

A. Beaucamp[2], R. Freeman[2], and Y. Namba[1]
[1]Chubu University, Kasugai, Japan
[2]Zeeko Ltd, Coalville, UK

In the Fluid Jet Method, a polishing fluid is compressed and delivered through a nozzle, allowing the spot area to become continuously replenished with abrasives and coolant. Process parameters include: Abrasive type and concentration, Inlet pressure, Nozzle diameter, Impingement angle, ... Per saperne di più

CFD Analysis of Argon Cell for Pyrochemical Processing

S. Agarwal[1], S. P. Ruhela[1], B. Muralidharan[1], B. P. Reddy[2], B. K. Sharma[1], K. Nagarajan[2], C. A. Babu[3], and K. K. Rajan[1]
[1]Fast Reactor Technology Group, Indira Gandhi Centre for Atomic Research
[2]Chemistry Group, Indira Gandhi Centre for Atomic Research
[3]HBNI & CDG, Indira Gandhi Centre for Atomic Research

An inactive Demonstration facility for the integrated pyroprocess, named High temperature Electrorefining (HTER) facility is in developing stage. This facility is equipped with several types of pyroprocess equipment such as electro-refiner, salt and cadmium distillation equipment, ... Per saperne di più

Objects in a Windtunnel Simulated With COMSOL

H. van Halewijn
Fontys Hogeschool
Applied Physics
Eindhoven, The Netherlands

For the educational program of Fluid Dynamics at the Fontys Hogeshool of Applied Physics, a wind tunnel was developed for tests of flow profiles of objects, such as a ball, cube or plate. Students are expected to measure the air resistance of a variety of objects, and verify the ... Per saperne di più

Study of Gas Dynamics in the Heat-accumulation Stoves

P. Scotton, and D. Rossi
Dipartimento di geoscienze
Università di Padova
Padova, Italy

The paper aims to clarify some aspects of the gases hydro-dynamics within the twisted conduct of heat accumulation stoves (ceramic-refractory stoves) downstream the combustion chamber. Both Comsol laminar and k-e turbulent models have been used in case of straight and curved pipes with ... Per saperne di più

Primo

781–790 of 1092

Prossimo

Ultimo