Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper e Appunti applicativi

Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo

In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.

Visualizza gli articoli presentati alla COMSOL Conference 2020

All

Bengaluru 2023

Munich 2023

2012 - Taipeix

Electric Field Analysis of a Green Rust Surface Treatment Tank for High/Super Alloys

H.K. Yang[1], S.C. Tseng[1]
[1]Institute of Mechanical Engineering, National Yunlin University of Science Technology, Taiwan

In order to perform rust surface treatment for stainless wires, we proposed an electrolyzing equipment to do so. It has the following advantages: safer, cheaper and less environmental pollution. To study the performance of the electrolyzing process, numerical simulation for electric ... Per saperne di più

Lithography-Patterning-Fidelity-Aware Electron-Optical System Design Optimization by Using COMSOL Multiphysics with MATLAB®

Sheng-Yung Chen [1], Kuen-Yu Tsai [1]
[1]Dept. of Electrical Engineering, National Taiwan University, Taipei, Taiwan

Electron-optical system (EOS) design for lithography provides the inherent advantage of higher resolution and maskless operation relative to optical technology. The use of multiple electron beams yields higher throughput, albeit with greater complexity in focusing, relative to the single ... Per saperne di più

Optimizing Fuel Cell Design with COMSOL Multiphysics

Chin-Hsien Cheng[1]
[1]Renewable Energy RD Center, Chung-Hsin Electric & Machinery, Taiwan

Proton exchange membrane fuel cells (PEMFCs) were investigated using COMSOL Multiphysics with the AC/DC Module and Chemical Engineering Module. Simulation may be used to increase the performance while decreasing the cost of the catalyst later (CL). Experimental validation of single and ... Per saperne di più

COMSOL Multiphysics: Innovative Design and Engineering

S. Wang[1]
[1]Department of Mechanical Engineering, Kun Shan University of Technology, Tainan, Taiwan

Multiphysics simulation has been used extensively in our research for fluid flow and heat transfer applications. Our projects include: simulation of fluid dynamics in an active liquid heat sink for CPU cooling, impeller design for a pipe flow generator with computational fluid dynamics ... Per saperne di più

Application of Numerical Simulation in Geotechnical Engineering

Dr. Meen-Wah Gui[1]
[1]Department of Civil Engineering, National Taipei University of Technology, Taipei, Taiwan

In this work, COMSOL Multiphysics was used to develop a model to investigate the degree of saturation in sloped terrain. The model was validated via laboratory experiments incorporating Lan’s man-made rainfall slope model test. The validated model was used in an actual case study to ... Per saperne di più

The Application of Low Temperature Plasma in COMSOL Multiphysics

Cheng-Che (Jerry) Hsu[1]
[1]Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan

Multiphysics simulation was used in this work to model inductively coupled plasmas (ICPs). Developing a model of an ICP is challenging due to the complex relationship between the applied electric field and mixture of chemical species that develops. A preliminary model was developed and ... Per saperne di più