Galleria dei Modelli

La Galleria dei Modelli raccoglie un'ampia varietà di modelli realizzati con COMSOL Multiphysics in diversi ambiti applicativi, inclusi quelli elettrico, meccanico, fluidico e chimico. E' possibile scaricare i file .mph dei modelli pronti all'uso e le istruzioni step-by-step per costruirli, e utilizzarli come punto di partenza per le proprie simulazioni. Lo strumento di Ricerca Rapida permette di trovare i modelli che si riferiscono alla propria area di interesse. Per scaricare i file .mph dei modelli è necessario effettuare il login o creare un account COMSOL Access associato a un numero di licenza valido.

Cooling of an Injection Mold

This model shows how you can use the Non-Isothermal Pipe Flow interface together with the Heat Transfer in Solids interface to model the cooling of a injection molded polyurethane part for a car steering wheel. The equations describing the cooling channels are fully coupled to the heat transfer equations of the mold and the polyurethane part.

Geothermal Heating from a Pond Loop

Ponds and lakes can serve as thermal reservoirs in geothermal heating applications. In this example, fluid circulates underwater through polyethylene piping in a closed system. The pipes are coiled in a slinky shape and grouped onto sleds. The Non-isothermal Pipe Flow interface sets up and solves the equations for the temperature and fluid flow in the pipe system, where the geometry is ...

Water Hammer Verification Model

When a valve is closed rapidly in a pipe network it gives rise to a hydraulic transient known as a water hammer. The propagation of these hydraulic transients can in extreme cases cause failures of pipe systems caused by overpressures. This is a model of a simple verification pipe system consisting of a reservoir, a pipe, and a valve. The valve is in this model closed instantaneously.

Discharging Tank

This tutorial model illustrates how to calculate the pressure drop and initial flow rate in a pipe system connected to water tank. The Pipe Flow interface contains ready to use friction models accounting for the surface roughness of pipes as well as pressure losses in bends and valves.

Insulation of a Pipeline Section

As oil flows through a pipeline section heat is released due to the work of internal friction forces in the fluid. With good insulation of the pipeline, this generated heat can be used to avoid preheating of the oil, despite the fact that it is to be transported in a cold environment over long distances. This model uses the Non-isothermal Pipe Flow interface to set up and solve the flow and ...

Probe Tube Microphone, Transient Model

It is often not possible to insert a normal microphone directly into the sound field being measured. The microphone may be too big to fit inside the measured system, such as for in-the-ear measurements for hearing aid fitting. The size of the microphone may also be too large compared to the wavelength, so that it disturbs the acoustic field. In these cases, a probe tube may be attached to the ...

Organ Pipe Design

This tutorial model uses the Pipe Acoustics, Frequency Domain user interface to model an organ pipe. The quarter wave resonance frequency is studied with respect to dependency on the pipe radius and the pipe wall thickness. The acoustic properties of the system can easily be studied with respect to other parameters like the pipe cross section shape, the pipe material, or even a steady flow of air ...

Convective Flow in a Heat Exchanger Plate

This example models flow in a heat exchanger plate by coupling a Laminar Flow interface to a Pipe Flow interface. By the use of the Pipe Flow interface to model the flow in the microchannels, the problem size is significantly reduced. Apart from the Pipe Flow licence also a licence supporting the Laminar Inflow feature is required to run the model.

Quick Search