Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Time step for solver, convergence and simulation results in COMSOL 3.5(a)

Please login with a confirmed email address before reporting spam

Hi all,

Can some body guide me regarding the convergence of the time dependent simulation. What exactly the inverse of the time step means and how much it should fall in order to consider convergence wrt time (I am using a time step of 1ms).
Another issue is that if I select free time step for the solver my results are different from the one calculated at strict time steps. I have no basis of comparison in this case which time step should I chose (free or strict)???? Do we have to increase the tolerances if we are using strict time steps (but already the default tolerances are kind of high like 0.01 relative and 0.001 absolute)


Kindest regards

0 Replies Last Post 4 set 2012, 07:18 GMT-4
COMSOL Moderator

Hello Sin Kim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.