Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

easy question, I think...

Please login with a confirmed email address before reporting spam

Dear friends,


I have a problem with COMSOL 4.2. It should be a silly thing, but I cannot solve it. I am absolutely new at comsol, besides.

I am starting using Comsol 4.2 and I have prepared a simple model: 1D, heat transfer in solids, a hot long bar with instantaneous cooling at the top. I prepare the mesh, choose Time-Dependent study, compute the model and T behaves correctly. I plot the heat flux (ht.fluxx) wrt time and it is correct. But I now tried to compute the time derivative of the ht.fluxx d(ht.fluxx,t) and I only get zeros. I use the Derived Values node to get numerical values and still get zeros. I'm storing time derivatives, also.

Some people told m that probably my results are beyond the mathematical resolution, but I don't think so. The heat fluxx variation is of the order of 0.1 and the time-step is of the order of 3e7. Moreover, I have change the time-step, I have used finer meshes. But still I get zeros.

Could somebody give some clue?

Thank you

5 Replies Last Post 7 nov 2011, 15:10 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 nov 2011, 03:14 GMT-4
Hi

COMSOL extracts (mostly ?) derivatives from the shape functions you use. If your shape function is linear you might not manage to get out any derivative, so first issue check the shape function setting, try to use a higher order 2nd or 3rd it should easy work for your 1D model

Also check if COMSOl does not already have a derivative defined internally, but I'm not sure "Tt" or "Ttt" exist, look up the doc

--
Good luck
Ivar
Hi COMSOL extracts (mostly ?) derivatives from the shape functions you use. If your shape function is linear you might not manage to get out any derivative, so first issue check the shape function setting, try to use a higher order 2nd or 3rd it should easy work for your 1D model Also check if COMSOl does not already have a derivative defined internally, but I'm not sure "Tt" or "Ttt" exist, look up the doc -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 nov 2011, 09:27 GMT-5
Thank you, Ivar.

I have found the shape functions at the Equation View. They are lagrange type. But I cannot change them there, at the "equation view" of the "Heat Transfer in solids" node. Is there any trick? Or maybe I cannot choose another one because it is 1D?
I do not know...
Thank you, Ivar. I have found the shape functions at the Equation View. They are lagrange type. But I cannot change them there, at the "equation view" of the "Heat Transfer in solids" node. Is there any trick? Or maybe I cannot choose another one because it is 1D? I do not know...

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 nov 2011, 10:39 GMT-5
Hi

you probably need to turn on the "Discretisation" tabs, see the preferences or the view icon

--
Good luck
Ivar
Hi you probably need to turn on the "Discretisation" tabs, see the preferences or the view icon -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 nov 2011, 11:35 GMT-5
Thank you for your time, Ivar. Thank you....

I turned on everything about the discretisation I have found (at the preferences, at the show icon...) but still I cannot edit the type of shape function...
Thank you for your time, Ivar. Thank you.... I turned on everything about the discretisation I have found (at the preferences, at the show icon...) but still I cannot edit the type of shape function...

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 nov 2011, 15:10 GMT-5
Hi

could it be this one ? (I'm in v4.2a)

--
Good luck
Ivar
Hi could it be this one ? (I'm in v4.2a) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.